Content |
Material: 100% Copper, PVC
Pattern: SJTW
Gauge: 16 AWG
Voltage: 125V
Operating Range(Recommended): -40¨H to 140¨H
UL Approved
"SJTW" Wire Type
This 3 prong extension cord is built with ¡°SJTW¡± wire with safe insulation, also designed for heavier and outdoor use.
Made of durable 16AWG extension cables and 3-prong grounded plug for maximum safety.
Premium material keeps it soft even in cold weather, easy to coil up for storage when not in use.
Specifications£º
Color: Black Brand: GARVEE Connector Gender: Male-to-Female Voltage: 125 Volts Input Current: 13 Amps
Customer questions & answers£º
Question: What is the input current? Answer:13 Amps
|
Overview: GARVEE 36"x36" inch Forklift Safety Cage Heavy Duty Collapsible Work Platform Forklift 1150LBS Capacity.without 4 swivel wheels.Durable Steel,The forklift platform is crafted with heavy-duty steel for ultimate durability. The yellow coating surface features efficient anti-rust and anti-corrosion.
Product Features:
Loading Capacity 36" L x 36" W and a weight capacity of 1150 lbs, can be easily installed on the forklift
Folded Storage Forklift safety cage easy to assemble and disassemble, fold and store when not in use, small storage space
Safe and Secure Non-slip floor, mesh back and rails help prevent falls, give you a secure station
Specifications£º
Brand |
GARVEE |
Material |
Alloy Steel |
Wheel Type |
Rubber |
Number of Wheels |
No
|
Part Number |
GJMX035 |
Size |
36" L x 36" W?
|
Load Capacity |
1150 pound/521.63kg |
Package Contents |
1 x Forklift cage |
|
Overview: GARVEE Electric Rebar Bender up to 1 inch with Our Electric Bender - Achieve 0-180¡ã Angles, Operate with Convenient Foot Pedal Switch, and Benefit from Powerful 1600W Motor.Ultra-Fast Bending, Bend rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) in just 6 to 7 seconds, with a bending angle range of 0-180¡ã and a bending radius of 1.57'' / 40 mm. This electric rebar bender saves valuable person-hours and delivers excellent performance.
Product Features:
Powerful Motor Equipped with a 1600W pure copper coil motor, this hydraulic bending machine runs quietly with low noise, reducing unnecessary wear and improving your working efficiency. The copper motor also extends the electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)
Accurate Angle Adjustment With two slide-type angle selectors and preset angle locks, this rebar bending machine helps you accurately bend any angle from 0-180 degrees. Note that the angle of point 1 must be bigger than point 2 for normal operation during bending processing.
Sturdy and Durable Build The electric bender machine features a sturdy iron body and durable Idler Wheel with ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel. This robust construction enables the machine to stand super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
Brand |
GARVEE |
Model |
RB25 |
Voltage |
110-120V |
Power |
1600W |
Frequency |
60Hz |
Amps |
14A |
Bending Angle |
0-180¡ã |
Max. Rebar Diameter |
1/4'' / 25 mm #8 Grade 60 |
Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
Bending Speed |
6-7 Seconds |
Bending Radius |
1.57 '' / 40 mm |
Max. Rebar Hardness |
HRC30 |
Noise |
92 dB(A) |
Shell Material |
Iron |
Certificate |
CE |
Item Dimensions(L x W x H) |
17.72 x 19.69 x 20.08''/45 x 50 x 51 cm |
Packing Size(L x W x H) |
19.11 x 21.21 x 22.3''/50 x 55 x 56 cm |
Gross Weight |
?240 pounds |
Package Contents |
1 x Electric Rebar Bending Machine 2 x pedals 3 x tension springs 4 x carbon brushes 1 x User Manual |
Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE Hanging Magnetic Sweeper 60inch Heavy-Duty Magnet Sweeper, Nail Magnet Sweeping Tool with 140 LBS Lifting Capacity, Magnet Double Magnetic Force Sweeper Unit, Hanging Magnet for Forklift.Sturdy Aluminum Casing, This Hanging Magnetic Sweeper Is Designed With A Heavy-Duty Aluminum Casing, And It Has Several Tightly-Fixed Lifting Handles That Are All Made Of Premium Steel. These High-Quality Materials Ensure It Can Be Used For Years To Come.
- Sturdy Aluminum Casing£ºThis hanging magnetic sweeper is designed with a heavy-duty aluminum casing, and it has several tightly-fixed lifting handles that are all made of premium steel. These high-quality materials ensure it can be used for years to come.
- 140 LBS Lifting Capacity£ºThis 48" magnetic sweeper covers a large area at a single time, saving effort and time. The internal magnets produce a strong magnetic force that can lift items weighing up to 140 lbs.
- Quick Releasing Lever£ºIt has one ergonomic load releasing lever, there is no need bother removing the countless sharp nails or screws with your bare hands. Once you pull it, everything will be released, which is more convenient and safer.
Clear the Way Effortlessly£ºJust put your forklift forks through the two handles, and use the eye bolts to fix them. Then drive the vehicle across your warehouse aisles, or any other place where you want to make it a clear "road". It won't miss a single nail. Wide Application£ºThis suspension-type magnetic sweeper can be used in many places, such as construction sites, factories, warehouses, etc. It is perfect for picking up nails, screws, and other sharp metals to prevent injury to workers, bystanders, or tires.
Product Features:
140 LBS Lifting Capacity This 60" magnetic sweeper covers a large area at a single time, saving effort and time. The internal magnets produce a strong magnetic force that can lift items weighing up to 140 lbs.
Quick Releasing Lever It has one ergonomic load releasing lever, there is no need bother removing the countless sharp nails or screws with your bare hands. Once you pull it, everything will be released, which is more convenient and safer.
Clear the Way Effortlessly Just put your forklift forks through the two handles, and use the eye bolts to fix them. Then drive the vehicle across your warehouse aisles, or any other place where you want to make it a clear "road". It won't miss a single nail.
Specifications£º
Brand |
GARVEE |
Material |
Aluminum |
Shape |
Rectangular |
Number of Pieces |
1 |
Pull Force |
140 Pounds |
Net Weight |
17.6 Pounds/7.98kg |
Package Dimensions |
49 x 7 x 5 inches |
Package Contents |
1 x Hanging Magnetic Sweeper |
|
Overview: PIONEERWORKS 3D Heat Press Machine All in One 800W, Portable Vacuum Sublimation Heat Press Transfer with Digital Controller, No Shape Limit for T-Shirt, Phone Case, Mug, Plate.LED Screen & Countdown Timer,PIONEERWORKS 3D heat press machine is designed with buttons to adjust time and temperature, with a digital display that makes it easier and faster for people of all ages to use. You can customize the temperature (104¨H~428¨H) and time (1-999s) depending on your need, you will get the result when you hear the beep at the end of the countdown
PIONEERWORKS Vacuum Heat Transfer Machine for Phone Case/ Cups/T-shirt/Pen
ALL IN ONE HEAT PRESS MACHINE
Be bold and try a new design!
This heat press machine has a new design that allows the pattern to be perfectly transferred to any item by vacuum compression. Compared to traditional one, it is no longer limited by the shape of the product, whether it's a cup, plate, phone case or even a pen, you can achieve your imagination!
No Shape Limit to DIY
This heat press machine uses a new format to reach uniform heating through 2 heat sources at the top and bottom. By the clever way of vacuuming, the shape is no longer limited, so whether it is an odd shaped cup, plate or various models of cell phone cases, the perfect transfer effect can be achieved.
Heat Press Machine for T-shirt 8.7" X 8.7"
The removable iron heat press 8.7" X 8.7" gives you the freedom to customize your t-shirt, cushion, sweater, towel, or blanket...We have prepared some transfer paper for you to try out immediately after you receive the product.
Start Your Business Right Now!
This heat press is perfect for starting your small business. Besides flat t-shirts, you can make a design in any shape of a cup, a bottle, or a phone case of any phone, which is a good idea for a gift for your child or friend.
New experience of parent-child interaction!
Easy to use and safe
We are thoughtfully equipped with an anti-scalding glove for you to protect you and your children from being burned.
4 steps to complete the transfer:
1. Place the printed transfer sticker firmly against the item and secure it with the included thermal tape.
2. Place the item in the appropriate bottle sleeve/mug press
3. Press VACUUM to pull out the air and allow the sticker to fit snugly on the surface of the product. Select the corresponding temperature and time.
4. Wait for the countdown to end, you can get a perfect DIY finished product!
Product Features:
Heat Press All IN ONE This vacuum heat press has a new design with closed heating by vacuum, not only for flat clothes but also can perfectly transfer patterns on irregular items through vacuum compressions, such as T-shirts, pillows, bags, mugs, tumblers, bottle, mouse pad, glass or crystal plate, phone case, etc. Compared with the traditional type of heat press machine, this machine is safer and easier to move
Excellent Effect It makes it easy to achieve flawless sublimation transfer with its stylish, space-saving, and sleek design. This stamping machine has two heat sources at the top and bottom, for even and clear transfer of the pattern onto the item
Perfect Gift This heat press is a serious and surprising gift for craft lovers. You can use it to design your mugs, plates, clothes, and phone cases, which is also a great gift idea for family and friends. The use of this heat press machine requires easy installation, please read the manual or the video on the page in advance
Specifications£º
Band |
PIONEERWORKS |
Power |
800w |
Rated Voltage |
220V-50HZ 110V-60HZ |
TEMP. Range |
104¨H - 428¨H £¨40 ¨H - 220 ¡??/td>
|
Time Range |
1~999 s |
Item model number |
PD2800 |
Cups Sizes |
3.54" Max. length: 10.23" |
Plate Sizes |
8.7" X 8.7" Max |
Iron Size forT-shirt |
7" x 8" |
Product Dimensions |
16.14 x 14.96 x 13.78 inches |
Item Weight |
20.9 pounds/9.48kg |
Package Contents |
Host 1 (800W host), 1 plastic seat, Sealing ring 1 set, 1 plastic frame, Vacuum leather 2 pieces, 2800 plug holder 1, Heat insulation pad 1, 2800 iron water plate 1, 2800 silicone tube 12*7 1, 1 pair of general high temperature gloves, 11OZ silicone cup holder 2pcs, 2800 straight cup clip 1, 1 cup holder with handle, 1 power cord, 1 manual, Lower silicone skin 1 part, |
?
|
Overview: GARVEE Electric Rebar Bender Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod (1600W Rebar Bender and Cutter).Lightning-Fast Performance: The rebar bending and cutting machine boasts exceptional performance, bending rebar from 1/4'' #2 to 1" #8 Grade 60 (6 to 25 mm) within 6 to 7 seconds and cutting rebar within 5-6 seconds. It can bend at any angle from 0-180¡ã with a bending radius of 1.57'' / 40 mm, and its maximum rebar hardness is HRC30. The hydraulic oil type used is VG46.
Product Features:
Powerful 1600W Copper Coil Motor Equipped with a 1700W pure copper motor, this rebar cutter and bender runs quietly, has low noise and improves working efficiency, reducing unnecessary wear. The copper motor extends the operating life of the machine. It operates at a voltage of 110V, frequency of 60 Hz, with amps of 14A, and noise level of 92 dB(A).
Angle Adjustment Made Easy The rebar bending machine has two slide-type angle selectors, making it easy to bend any angle from 0-180 degrees. Preset angle locks ensure accurate, repeatable angle bending. During bending, the angle of point 1 must be greater than point 2 for proper operation.
Durable Construction This bar bender machine has a sturdy iron machine body and durable Idler Wheel. The ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel are strong and unlikely to break. It can handle super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
Brand |
GARVEE |
Model |
RBC25 |
Voltage |
110V |
Power |
1600W |
Frequency |
60Hz |
Amps |
14A |
Bending Angle |
0-180¡ã |
Max. Rebar Diameter |
1" / 25 mm #8 Grade 60 |
Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
Bending Speed |
6-7 Seconds |
Bending Radius |
1.57'' / 40 mm |
Max. Rebar Hardness |
HRC30 |
Noise |
105 dB(A) |
Shell Material |
Iron |
Certificate |
CE |
Item Dimensions(L x W x H) |
19.69 x 17.72 x 31.1'' / 50 x 45 x 79 cm |
Packing Size(L x W x H) |
22.44 x 18.9 x 38.58'' / 57 x 48 x 98 cm |
Gross Weight |
?331 pounds |
Package Contents |
1 x Electric Rebar Bender and Cutter 2 x Foot Pedals 3 x Tension Springs 4 x Carbon Brushes 1 x User Manual |
Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Reviews
There are no reviews yet.