| Content | '--Complete engine kit for modified bikes.--Heavy duty metal engine body for increased durability.--Super fuel efficient, consumes only 2.5 liters of fuel per 100 kilometers.--The maximum safe speed is 54 km/h.--Comes with all the hardware needed for easy installation.--Suitable for most 24" and 26" bikes, such as mountain bikes, road bikes, cruisers, helicopters.
Description:
Product Name: Engine Kit
1. Engine type: single-cylinder, air-cooled, two-stroke gasoline engine
2. Bore size and stroke: 47mmx40mm/80CC
3. Ignition method: CDI ignition
4. Max. Power: 2.5kw/6000r/min
5. Compression ratio: 6:1
Packing list:
1 x engine
1 x oil tank
1 x silencer
1 x carburetor
1 x electronic igniter
1 x throttle control
1 x clutch control
1 x accelerator cable
1 x clutch cable
1 x chain
1 x chain guard
1 x sprocket
1 x Reactro component
1 x gasket
1 x fuel tank switch
1 x accelerator cable
Note:
1. Due to manual measurement, please allow 1-3cm error. Make sure you don't mind before bidding.
2. Due to the difference of different monitors, the picture may not reflect the actual color of the product. Thanks. |
Overview: GARVEE Electric Rebar Bender Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod (1600W Rebar Bender and Cutter).Lightning-Fast Performance: The rebar bending and cutting machine boasts exceptional performance, bending rebar from 1/4'' #2 to 1" #8 Grade 60 (6 to 25 mm) within 6 to 7 seconds and cutting rebar within 5-6 seconds. It can bend at any angle from 0-180¡ã with a bending radius of 1.57'' / 40 mm, and its maximum rebar hardness is HRC30. The hydraulic oil type used is VG46.
Product Features:
Powerful 1600W Copper Coil Motor
Equipped with a 1700W pure copper motor, this rebar cutter and bender runs quietly, has low noise and improves working efficiency, reducing unnecessary wear. The copper motor extends the operating life of the machine. It operates at a voltage of 110V, frequency of 60 Hz, with amps of 14A, and noise level of 92 dB(A).
Angle Adjustment Made Easy
The rebar bending machine has two slide-type angle selectors, making it easy to bend any angle from 0-180 degrees. Preset angle locks ensure accurate, repeatable angle bending. During bending, the angle of point 1 must be greater than point 2 for proper operation.
Durable Construction
This bar bender machine has a sturdy iron machine body and durable Idler Wheel. The ?78 iron Gyre Idler Wheel and ?94 Fixed Idler Wheel are strong and unlikely to break. It can handle super-hard rebar with strong clamping force, reducing steel rebar waste.
Specifications£º
| Brand |
GARVEE |
| Model |
RBC25 |
| Voltage |
110V |
| Power |
1600W |
| Frequency |
60Hz |
| Amps |
14A |
| Bending Angle |
0-180¡ã |
| Max. Rebar Diameter |
1" / 25 mm #8 Grade 60 |
| Min. Rebar Diameter |
1/4'' / 6 mm #2 Grade 60 |
| Bending Speed |
6-7 Seconds |
| Bending Radius |
1.57'' / 40 mm |
| Max. Rebar Hardness |
HRC30 |
| Noise |
105 dB(A) |
| Shell Material |
Iron |
| Certificate |
CE |
| Item Dimensions(L x W x H) |
19.69 x 17.72 x 31.1'' / 50 x 45 x 79 cm |
| Packing Size(L x W x H) |
22.44 x 18.9 x 38.58'' / 57 x 48 x 98 cm |
| Gross Weight |
?331 pounds |
| Package Contents |
1 x Electric Rebar Bender and Cutter
2 x Foot Pedals
3 x Tension Springs
4 x Carbon Brushes
1 x User Manual |
| Application |
Rebar, Round Steel, Flat Iron, Steel Bar Processing Plant, Construction Industry, Bridge Construction, etc |
|
Overview: GARVEE 36"x36" inch Forklift Safety Cage Heavy Duty Collapsible Work Platform Forklift 1150LBS Capacity.without 4 swivel wheels.Durable Steel,The forklift platform is crafted with heavy-duty steel for ultimate durability. The yellow coating surface features efficient anti-rust and anti-corrosion.
Product Features:
Loading Capacity
36" L x 36" W and a weight capacity of 1150 lbs, can be easily installed on the forklift
Folded Storage
Forklift safety cage easy to assemble and disassemble, fold and store when not in use, small storage space
Safe and Secure
Non-slip floor, mesh back and rails help prevent falls, give you a secure station
Specifications£º
| Brand |
GARVEE |
| Material |
Alloy Steel |
| Wheel Type |
Rubber |
| Number of Wheels |
No
|
| Part Number |
GJMX035 |
| Size |
36" L x 36" W?
|
| Load Capacity |
1150 pound/521.63kg |
| Package Contents |
1 x Forklift cage |
|
Overview: PIONEERWORKS 3D Heat Press Machine All in One 800W, Portable Vacuum Sublimation Heat Press Transfer with Digital Controller, No Shape Limit for T-Shirt, Phone Case, Mug, Plate.LED Screen & Countdown Timer,PIONEERWORKS 3D heat press machine is designed with buttons to adjust time and temperature, with a digital display that makes it easier and faster for people of all ages to use. You can customize the temperature (104¨H~428¨H) and time (1-999s) depending on your need, you will get the result when you hear the beep at the end of the countdown
PIONEERWORKS Vacuum Heat Transfer Machine for Phone Case/ Cups/T-shirt/Pen
ALL IN ONE HEAT PRESS MACHINE
Be bold and try a new design!
This heat press machine has a new design that allows the pattern to be perfectly transferred to any item by vacuum compression. Compared to traditional one, it is no longer limited by the shape of the product, whether it's a cup, plate, phone case or even a pen, you can achieve your imagination!
No Shape Limit to DIY
This heat press machine uses a new format to reach uniform heating through 2 heat sources at the top and bottom. By the clever way of vacuuming, the shape is no longer limited, so whether it is an odd shaped cup, plate or various models of cell phone cases, the perfect transfer effect can be achieved.
Heat Press Machine for T-shirt 8.7" X 8.7"
The removable iron heat press 8.7" X 8.7" gives you the freedom to customize your t-shirt, cushion, sweater, towel, or blanket...We have prepared some transfer paper for you to try out immediately after you receive the product.
Start Your Business Right Now!
This heat press is perfect for starting your small business. Besides flat t-shirts, you can make a design in any shape of a cup, a bottle, or a phone case of any phone, which is a good idea for a gift for your child or friend.
New experience of parent-child interaction!
Easy to use and safe
We are thoughtfully equipped with an anti-scalding glove for you to protect you and your children from being burned.
4 steps to complete the transfer:
1. Place the printed transfer sticker firmly against the item and secure it with the included thermal tape.
2. Place the item in the appropriate bottle sleeve/mug press
3. Press VACUUM to pull out the air and allow the sticker to fit snugly on the surface of the product. Select the corresponding temperature and time.
4. Wait for the countdown to end, you can get a perfect DIY finished product!
Product Features:
Heat Press All IN ONE
This vacuum heat press has a new design with closed heating by vacuum, not only for flat clothes but also can perfectly transfer patterns on irregular items through vacuum compressions, such as T-shirts, pillows, bags, mugs, tumblers, bottle, mouse pad, glass or crystal plate, phone case, etc. Compared with the traditional type of heat press machine, this machine is safer and easier to move
Excellent Effect
It makes it easy to achieve flawless sublimation transfer with its stylish, space-saving, and sleek design. This stamping machine has two heat sources at the top and bottom, for even and clear transfer of the pattern onto the item
Perfect Gift
This heat press is a serious and surprising gift for craft lovers. You can use it to design your mugs, plates, clothes, and phone cases, which is also a great gift idea for family and friends. The use of this heat press machine requires easy installation, please read the manual or the video on the page in advance
Specifications£º
| Band |
PIONEERWORKS |
| Power |
800w |
| Rated Voltage |
220V-50HZ 110V-60HZ |
| TEMP. Range |
104¨H - 428¨H £¨40 ¨H - 220 ¡??/td>
|
| Time Range |
1~999 s |
| Item model number |
PD2800 |
| Cups Sizes |
3.54" Max. length: 10.23" |
| Plate Sizes |
8.7" X 8.7" Max |
| Iron Size forT-shirt |
7" x 8" |
| Product Dimensions |
16.14 x 14.96 x 13.78 inches |
| Item Weight |
20.9 pounds/9.48kg |
| Package Contents |
Host 1 (800W host),
1 plastic seat,
Sealing ring 1 set,
1 plastic frame,
Vacuum leather 2 pieces,
2800 plug holder 1,
Heat insulation pad 1,
2800 iron water plate 1,
2800 silicone tube 12*7 1,
1 pair of general high temperature gloves,
11OZ silicone cup holder 2pcs,
2800 straight cup clip 1,
1 cup holder with handle,
1 power cord,
1 manual,
Lower silicone skin 1 part, |
?
|
Overview: GARVEE Service Cart 2-Shelf, Storage Handle, 500 lbs Capacity, for Warehouse/Garage/Cleaning/Manufacturing£¬45"X25".Engineering Plastic Thickened, The Double-Grid Arc Curve Of The Handle Conforms To The Comfort Of The Human Palm, And Does Not Cut Hands When Pulling The Cart. The Handshake Position Is About 1.38in Thick. Frosted Non-Slip Double Armrests, With Frosted Texture On The Surface, More Comfortable And Durable, Easy To Exert Force. Lightweight And Maneuverable
-
Engineering Plastic Thickened£º?The double-grid arc curve of the handle conforms to the comfort of the human palm, and does not cut hands when pulling the cart. The handshake position is about 1.38in thick. Frosted non-slip double armrests, with frosted texture on the surface, more comfortable and durable, easy to exert force. Lightweight and maneuverable
-
PERFECT FOR THE HEAVIEST LOADS£ºThis service cart with wheels is perfect for transporting materials, supplies, and heavy loads in almost any environment. Structural foam provides more durability than other materials, offering 500 pounds of storage weight capacity.
-
EASY MANEUVERABILITY£ºErgonomically designed push cart handle provides optimum hand placement and push height improving control and worker safety. Navigate warehouses, classrooms, loading docks, or stock rooms with ease.
-
SPECIALLY DESIGNED WHEELS£º5-inch non-marking thermoplastic rubber swivel casters absorb shock, provide floor surface protection, and quiet operation. Ideal for home use, garage, Workshops, warehouse, Office, restaurants, businesses and more
-
Quick to assemble£ºEach shelf tray has a working dimensions of 36" length x 24" wide
Commercial Grade Quality
Holds 500lbs
Easy To Assembly
Upgrade Wheels
Multi Purpose
Versatile
Product Features:
Perfect For The Heaviest Loads
This service cart with wheels is perfect for transporting materials, supplies, and heavy loads in almost any environment. Structural foam provides more durability than other materials, offering 500 pounds of storage weight capacity.
Easy Maneuverability
Ergonomically designed push cart handle provides optimum hand placement and push height improving control and worker safety. Navigate warehouses, classrooms, loading docks, or stock rooms with ease.
Specially Designed Wheels
5-inch non-marking thermoplastic rubber swivel casters absorb shock, provide floor surface protection, and quiet operation. Ideal for home use, garage, Workshops, warehouse, Office, restaurants, businesses and more
Specifications£º
| Brand |
GARVEE |
| Material |
Plastic,Thermoplastic Rubber |
| Color |
Black |
| Special Feature |
Black |
| Product Dimensions |
10"D x 2"W x 10"H |
| Net Weight |
52 Pounds/23.59kg |
| Package Contents |
1 x Service Cart |
|
Overview: GARVEE 60" Bucket Clamp on Debris Forks, Heavy Duty Clamp on Pallet Fork 4000 lbs Capacity Bucket Forks Attachments Fit for Loader Bucket Skidsteer Tractor.Bolted Design, Tractor bucket teeth' s inside width is 60", suitable for most loaders. It uses bolted design and plays the role of connection and fixation. Each handle and socket is equipped with a 5/8 "set screw, you can use a 5/16" hexagon wrench to set the screw.
Product Features:
Replaceable Tooth
The bucket tooth bar is equipped with 6 teeth, the clearance is 9.84", which is replaceable and interchangeable. Generally, the broken part of the bucket tooth is a tooth tip, which means that you can replace a broken tooth instead of buying a brand new track.
Protective Coating
The surface of the bucket tooth bar is treated with a metal protective coating, which insulates the metal from the air and keeps other substances from reacting with the metal. It exempts from wearing, rusting, and corrosion, thus extending the service life.
Q345 Steel Alloy
The loader bucket tooth bar adopts Q345 steel material, also known as alloy steel, which has higher strength than carbon steel. Its low carbon content and low alloying element content effectively penetrate compacted soil and other materials.
Specifications£º
| Band |
GARVEE |
| Part Number |
?CHANDOU |
| Item model number |
?WYVTDC |
| Color |
?Black |
| Item Package Quantity |
?1 |
| Product Dimensions |
?6.69 x 15.35 x 60.63 inches |
| Item Weight |
?90 pounds/40.82kg
|
| Included Components |
?1 x Bucket Clamp on Debris Forks |
|
Reviews
There are no reviews yet.